Eric Bearing Limited offer not only Bearings but also Bearing housing,Where there is a bearing, there must be a support point, the bearings internal support point is the shaft, the external support is bearing housing.Because a bearing can c

In order to provide better performance for BEARINGS , the bearing is used to lubricate the bearing, which can reduce the friction and temperature rise of the bearing,If grease is bad, it will not play a role of itself,but also the use of be

The bearing is composed of inner, outer ring, rolling body (ball, roller or needle) and retaining device. Except for the retaining device, the rest is made of bearing steel.When bearing work, the bearing inner and outer ring, bearing rollin

FAG spindle bearings are single row angular contact ball bearings made up of solid inner ring, outer ring, ball and cage assembly with solid window cage. They are not removable.These FAG bearings can be open or sealed. FAG spindle bearings

In terms of shape, there are two criteria for the difference between the needle and the cylindrical. The first is that the ratio is 2.5 as the cut-off point.The second criterion is a scale of 4.Need bearing SKF AXK 1226,SKF AXK 85110,click

Generally speaking, the steps of selecting bearings may be summarized as follows: 1. According to the bearing working conditions (including the type of load direction and load, speed, lubrication way and the orientation of coaxial degree re

1. The tolerance level of the bearing is determined according to the rotation accuracy requirement of the axial support. Level 0: it is widely used in general bearing systems with rotating precision greater than 10 m.Such as the speed chang

NSK Single row angular contact ball bearings , machine tool spindle, high frequency motor, gas turbine, centrifugal separator, small car front wheel, differential pinion shaft, booster pump, drilling platform, food machinery, dividing head,

The mechanical type is different, the use condition of NSK bearing will be different, and the performance requirements of the bearing are different, but generally, there are not less than two bearings used on one shaft. Moreover, in order t

In the actual production , machinery and equipment used by the FAG bearing life directly related to the normal use of the mechanical equipment and its normal production . Although according to the different use of the environment and condit