At lower temperatures, the starting torque in grease lubrication applications usually increases significantly. Starting torque is not mainly determined by the stability of the grease, but is usually determined by the rheological characteris

THK Linear guide rails, also known as linear guide rails, slide rails, linear guide rails, and linear slide rails, are used in linear reciprocating movements and can bear a certain torque to achieve high-precision linear motion under high l

FAG deep groove ball bearings are the most representative rolling bearings with a wide range of uses. It is suitable for high-speed or even high-speed operation, and it is very durable and does not require frequent maintenance. This type of

SKF Self-aligning ball bearings: The SKF self-aligning ball bearing is a bearing equipped with spherical balls between the inner ring of two raceways and the outer ring with spherical raceways. There are two rows of steel balls, the inner r

In bearings field,in genera,it divide the bearings into two different types,one-ball bearings,another-roller bearings. Eric Bearing Limited has enough stock for all different types of bearings,Deep groove ball bearings,Angular contact ball

INA bolt-shaped curved rollers are generally full-roller structures. The bolt shaft raceway is quenched. To avoid stress concentration, the outer surface of the thick-walled outer ring of the roller is curved. The outer ring has two integra

Single-row FAG tapered roller bearings have tapered inner and outer ring raceways. Tapered rollers are generally separated by stamped cages between the inner and outer raceways. This type of product can withstand combined radial and axial l

NSK Tapered roller bearings are separated type bearings. Both inner and outer rings of the bearings have tapered raceways, and the roller is round. The roller is in line contact with the raceway and can bear heavy combined radial and axial

FAG angular contact ball bearings have a higher limit speed and can bear both radial and axial loads, as well as pure axial loads. The axial load capacity is determined by the contact angle, and the single row angle increases with the conta

What is Spherical roller bearings? The bearing is installed between the outer ring of the spherical surface of the inner ring box of the two raceways, and is equipped with spherical balls. The outer diameter of the self-aligning functional