INA CSXA025
        | d 63,5
mm d 2 1/2
inch D 76,2
mm rmin 0,6
mm min. 0,6 is the smallest chamfer distance and the largest permissible rounding radius on the shaft and in the housing. nG Öl 5100
1/min Limiting speed With grease lubrication, the permissible value is taken as 70% of the value given in the table. Values are valid for a combination of axial and radial loads in a ratio Fa/Fr >= 0,8. D1 71,5
mm Cr 5000
N Basic dynamic load rating, radial C0r 5700
N Basic static load rating, radial d1 68,2
mm B 6,35
mm m 0,06
kg Mass Type: Thin section bearings |